URL: http://www.totalparadox.com/jeep/pics/mods/html/tracbar.htm

Date Submitted: 12/15/03

Description: This is one of the easier mods I've done. I installed a adjustable trac bar made by Currie. You will need a 9/16 drill bit and some basic hand tools. Removing the torx head bolt was easy to do. I soaked it with some PB Blaster the night before and using a good torx bit with a short bar over the rachet it broke free with one easy pull. After loosening the castle nut on the frame mounted side I added some heat using a propane torch and with a small hammer smacked the top of the castle nut, the trac bar fell right out. Next I drilled out the frame hole and installed frame mounted end of the trac bar. There is a small tapered cone that fits in the hole you drilled. Adjust to center the axle, bolt up the axle mount end and torque verythng down to specs.

Rating: 0/5 based on 0 votes

Hits: 156 to site, 0 from site. Averaging 0 out and 0 in per day.

Reviews: (0) Comments

Rate this Link:

Rate this site: 5 - Perfect 4 - Good 3 - Average 2 - Mediocre 1 - Bad

Remote voting code: Add rate code on your site for remote voting, which looks like the selector above:

<form action="http://www.links4jeeps.com/vote.php?action=vote&id=687" method="post"> <b>Rate this site:</b> <select name="votevalue"> <option value="5">5 - Perfect</option> <option value="4">4 - Good</option> <option value="3">3 - Average</option> <option value="2">2 - Mediocre</option> <option value="1">1 - Bad</option> </select> <input type="submit" value="Rate this site"> </form>

Link hit in count code: Use the below link url on your site to track link hits from your site to http://www.links4jeeps.com. This feature is normally used with link sharing, reciprocal links, affiliate links which are displayed on the main page. We also have a few other ideas in mind that require link tracking. It would be wise to use the in.php code just in case things are implemented and you wont be left behind. Keep in mind if you do not use the below code you will not get credit for inbound links. Notifiy Us and we will convert your link from a normal link to a reciprocal link giving you front page access and top of your category listing. You will have to use the below code because there is only room for 10 links and links are placed based on highest link hits in.

http://www.links4jeeps.com/in.php?id=687

Search feature: Add a search feature to your site like the one below, which uses our database.
The below code by default does track inbound links, however if you would like code that does not track inbound hits to links4jeeps.com visit the webmaster tools section

Links4Jeeps.com

Use the following default code or change it to suit your sites needs:

<table> <td> <form action="http://www.links4jeeps.com/remotesearch.php?filled=1&whichtype=all&id=687" method="post"> <font face="Verdana, Arial, Helvetica, sans-serif" size="1">Links4Jeeps.com</font><br> <input type="text" name="search" size="30"> <input type="submit" name="Submit2" value="Search"> </form></td> </table>

E-mail Link to Someone:

Send from to the email