|
|||||||||
|
|||||||||
|
The next step is to cut out the template supplied by PSC. Gavin recomended that I cut an aditional 1/4" off the outside edge of the template. This worked well and I would also recomend it. Next I covered the top of the fensers with duct tape and used a Sharpie to trace the outline of the template onto the fender. |
Air, Armor, Audio, Body, Brakes, CBs, Clubs, Drive train, Electrical, Forums, Gadgets, General Info, Jeep Websites, Off Road Parks/Places, Products, Recovery, Safety, Storage, Suspension, Video, Wheels & Tires
Jeep®, Wrangler, Liberty, Wagoneer, Cherokee,
and Grand Cherokee are copyrighted and trademarked to Daimler-Chrysler Corporation.
Links4Jeeps.com is not in any way associated with the Daimler-Chrysler Corp.
All material obtained from Links4Jeeps.com is strickly for reference only. Links4Jeeps.com does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, or process disclosed.
