|
|||||||||
|
|||||||||
| Use a 14mm socket and remove the 4 nuts holding the stock backing plate on. Place a piece of paper towl in the axle shaft hole to limit any debris from entering the axle tube. |
Air, Armor, Audio, Body, Brakes, CBs, Clubs, Drive train, Electrical, Forums, Gadgets, General Info, Jeep Websites, Off Road Parks/Places, Products, Recovery, Safety, Storage, Suspension, Video, Wheels & Tires
Jeep®, Wrangler, Liberty, Wagoneer, Cherokee,
and Grand Cherokee are copyrighted and trademarked to Daimler-Chrysler Corporation.
Links4Jeeps.com is not in any way associated with the Daimler-Chrysler Corp.
All material obtained from Links4Jeeps.com is strickly for reference only. Links4Jeeps.com does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, or process disclosed.
