|
|||||||||
|
|||||||||
|
After you mount your control arm, which NthDegree recommends your control arms to be 15 3/4 inches long. I assumed it meant from center of hole to center of hole. It wasn't specific so a guess is what Im using for now. You need to place an oval shaped notch in the top of your axle side lower control arm mount. When your axle droops on onside its going to force your arm up. There needs to be some room for your arm to twist up into. The top of the arch there is a hole predrilled in your axle. Just grind it out and continue the oval down. |
Air, Armor, Audio, Body, Brakes, CBs, Clubs, Drive train, Electrical, Forums, Gadgets, General Info, Jeep Websites, Off Road Parks/Places, Products, Recovery, Safety, Storage, Suspension, Video, Wheels & Tires
Jeep®, Wrangler, Liberty, Wagoneer, Cherokee,
and Grand Cherokee are copyrighted and trademarked to Daimler-Chrysler Corporation.
Links4Jeeps.com is not in any way associated with the Daimler-Chrysler Corp.
All material obtained from Links4Jeeps.com is strickly for reference only. Links4Jeeps.com does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, or process disclosed.
